FRSKY Archer Plus SR10+
The Archer Plus SR10+ is a 10-channel stabilized receiver supporting both ACCESS and ACCST D16 protocols — the RF protocol is smart-matched automatically during binding, so older Taranis-series and newer X14/X18/X20-series transmitters both bind without any manual switching. The built-in 3-axis gyroscope and accelerometer add self-leveling flight modes (Auto-Level, Stabilization, Knife-Edge) without a separate stabilizer unit. Enhanced anti-RF-interference capability delivers more solid RF performance across all environments, including in proximity to spark ignition engines. FBUS support enables single-wire bidirectional telemetry pairing with ADV sensors and the Neuron ESC. With SBUS In for signal redundancy, OTA firmware updates in ACCESS mode, and 10 configurable channel ports, the SR10+ is the flagship stabilized ACCESS receiver in the Archer Plus lineup.
 
Why We Recommend This
The Archer Plus SR10+ is our top pick for 10-channel builds on Taranis and ACCESS-capable radios — the auto-protocol matching means it works out of the box with D16, ACCESS, and everything in between, and the built-in gyro stabilizer handles self-leveling without adding a separate unit. FPV Builds RC provides U.S.-based product support, receiver-selection assistance, and setup guidance for FrSky products purchased through our store.
Frequently Asked Questions:
 
Which FrSky transmitters are compatible with the Archer Plus SR10+?
The SR10+ is compatible with FrSky transmitters and RF modules supporting ACCESS (including X18, X18S, X18SE, X18RS, X20, X20S, X20RS, X20 Pro, X20 Pro AW, X20 R, X14, X14S, X14RS, X-Lite S, Taranis X9 Lite S) or ACCST D16 (including Taranis X9D, X9D Plus, QX7, QX7S), subject to compatible transmitter and receiver firmware and applicable regional FCC/LBT versions. The RF protocol is smart-matched automatically during binding — no manual switching needed. Browse our full transmitter lineup at https://www.fpvbuildsrc.com/frsky-transmitters
 
What is the gyro stabilization and what aircraft benefit from it?
The SR10+ has a built-in 3-axis gyroscope and accelerometer that enable Auto-Level, Stabilization, and Knife-Edge flight modes without a separate stabilizer unit. Fixed-wing aircraft benefit the most — warbirds, gliders, trainers, and scale planes where the built-in gyro reduces turbulence and enables self-leveling recovery. For FPV multirotors with a dedicated flight controller, the non-stabilized R10+ is the better fit.
 
What is the difference between the SR10+ and R10+?
Both are 10-channel ACCESS/ACCST D16 Archer Plus receivers. The SR10+ (Stabilized Receiver) adds the built-in 3-axis gyro/accelerometer for self-leveling flight modes. The R10+ is the non-stabilized version — lighter and ideal for aircraft running a dedicated flight controller.
 
What is the difference between ACCESS and ACCST D16 modes?
ACCESS is FrSky's newer digital protocol with over-the-air (OTA) firmware updates, improved telemetry, and enhanced security. ACCST D16 is the older protocol compatible with classic Taranis-series transmitters. The Archer Plus SR10+ supports both and auto-matches during binding — no manual protocol switching needed.
 
How do I use FBUS for telemetry on the SR10+?
Assign a channel port to FBUS mode in your transmitter's settings. Connect ADV sensors (FAS current sensor, GPS ADV, VARI) or a Neuron ESC to that FBUS port. Bidirectional data flows on a single wire — sensor readings appear live on your radio screen with no S.Port hub needed. Browse compatible sensors at https://www.fpvbuildsrc.com/frsky-sensors
 
Does the SR10+ support OTA firmware updates?
Yes — in ACCESS mode. Firmware updates are delivered over-the-air from your transmitter via ETHOS or EdgeTX/OpenTX. OTA updates are not available in ACCST D16 mode.
 
How do I configure the Archer Plus SR10+'s stabilization in ETHOS?
Current FrSky stabilized receivers are configured through the applicable Stabilizer Config/device configuration functions in ETHOS. Receiver orientation, aircraft type, stabilization mode, channel assignments, and related settings should be configured for the specific receiver and aircraft installation. Follow the current FrSky/ETHOS instructions for the Archer Plus SR10+.
Does FPV Builds RC offer setup support for the Archer Plus SR10+?
Yes — we're a U.S.-based FrSky dealer happy to help with binding, stabilization setup, and FBUS wiring. Browse our full FrSky receiver range at https://www.fpvbuildsrc.com/frsky-receivers